Different Kinds of Stained Glass Tools

There are numerous tools associated when controling stained glasses. This equipment ease the work associated with the glass especially soldering, cutting, marking and smothering the glass. A number of the Stained Glass Tools used are as highlighted below.

Inside the workshop, glass must be cut. The most popular tools are glass cutters which can be made of one of the wheels delayed by bearings. The wheels can be made associated with a hard materials carbide, steel or in other words tungsten. Although all glass cutters are unique, only the handles make them not the same as one another.


Other stained glass tools range from the soldering iron and grinder. A soldering iron is a tool using a temperature control knob which usually regulates the temperature with all the it. A grinder is surely an electric tool used in glassware industry to really make the edges of the glass smooth. Aside from the grinder, other essential tools required for the work of smoothing the perimeters of glass are worktable or board and the brushes.

Another key stained glass tool necessary for the task is the grozing pliers. Its look likes the standard pliers though its main objective is to cut charge. The grozing pliers is preferred to the standard pliers considering that the pressure it relates to the glass far less than that applied by ordinary pliers. When the pressure is simply too much, it contributes to the glass cracking. Grozing pliers are somewhat unaffordable, so a unique standard knife known as putty knife may be used instead. Before using the standard knife, one should get a new blade to check thin and sharp.
Sign In or Register to comment.